Follow these easy steps to get your AEG FAVORIT 55602 W0P Dishwasher up and running in no time.
Remove all packaging materials from the dishwasher. Ensure that no parts are damaged during transport. If any part is damaged, do not use the dishwasher and contact the supplier.
Place the dishwasher on a flat, stable surface. Ensure that the appliance is level to prevent water leakage or operational issues.
Connect the water inlet hose to the water tap. Ensure that the connection is secure to prevent any leaks. Open the water tap to check for leaks.
Attach the drain hose to the sink spigot or a dedicated drain outlet. Ensure the hose is not kinked or bent, which could impede water flow.
Plug the dishwasher into a grounded electrical outlet. Ensure that the power supply matches the specifications on the rating plate.
Turn the cap of the salt container counterclockwise and remove it. Fill the container with 1 litre of water (only for the first use) and then add dishwasher salt until the container is full.
Open the rinse aid dispenser and fill it until the rinse aid reaches the 'max' level. Close the dispenser cap tightly.
Start the shortest programme with a rinsing phase to remove any processing residuals. Do not add detergent and do not load the baskets.
Set the water softener level according to the hardness of the water in your area. Adjust the released quantity of rinse aid if necessary.